How Many Sets and Reps Should You Do?
How many sets and reps should you actually do? Learn how your goal, exercise choice, effort and weekly training affect the answer — and how to choose a useful starting point.
Three sets of ten.
It’s probably the most familiar prescription in the gym.
But there’s nothing magical about 3 × 10.
The number of sets and reps you should do depends on what you’re training for, the exercise you’re doing, how hard those sets are and how much training you’re already doing.
You don’t need to find one perfect number.
You need a useful starting point that you can progress from.
For most people, 2–3 working sets per exercise is a sensible start: around 3–6 reps for heavy strength work, 6–15 reps for building muscle and 15 or more for muscular endurance, with most sets stopping a rep or two short of failure.
First: what are sets and reps?
A rep, or repetition, is one complete performance of an exercise.
If you squat down and stand back up once, that’s one rep.
A set is a group of reps performed together.
So:
3 × 8 squats
means:
3 sets of 8 repetitions
or 24 total reps.
Simple enough.
The more important question is how many of each you actually need.
Your goal matters
Different rep ranges can be useful for different training goals.
There isn’t a hard line where one rep range suddenly stops working and another starts.
But there are useful tendencies.
If your main goal is strength
Lower-to-moderate rep ranges are commonly used because they allow you to practise lifting relatively heavy loads.
A session might include work such as:
3–6 reps per set
for your main strength exercises.
That doesn’t mean every exercise needs to be performed for three reps.
You might train a squat or bench press with lower reps, then use moderate or higher reps for your accessory exercises.
If you’re not sure what weight suits a given number of reps, the rep-max table in our 1RM calculator gives a rough starting point.
How many sets and reps to build muscle
Muscle can be built across a fairly wide range of repetitions when sets provide an appropriate training stimulus.
In practice, moderate rep ranges are often convenient.
Something like:
6–15 reps
works well for many exercises because it allows meaningful resistance without every set becoming extremely heavy or extremely long.
But don’t interpret 6–15 as a rule.
Five reps aren’t suddenly useless for muscle.
Sixteen reps don’t suddenly stop working.
The range is a practical tool, not a biological switch.
If your goal is muscular endurance
Higher-repetition sets can be useful when you want your muscles to sustain effort for longer.
You might use:
15+ reps
depending on the exercise and programme.
Again, the exact number isn’t the important part.
The training needs to match what you’re trying to improve.
How many sets and reps should beginners do?
If you’re relatively new to strength training, simplicity helps.
For many exercises, something like:
2–3 working sets
within a moderate rep range can be a reasonable starting structure.
For example:
- Goblet squat: 3 × 8–10
- Dumbbell bench press: 3 × 8–12
- Lat pulldown: 3 × 8–12
- Dumbbell curl: 2 × 10–15
That isn’t a universal programme.
It’s an example of how straightforward training can be.
You don’t need six different rep ranges in the same workout just because they exist.
A rep range is often more useful than one exact number
Instead of prescribing:
3 × 10
you could use:
3 × 8–10
Now you have room to progress.
Suppose you’re bench pressing 60 kg.
- Session 1: 8, 8, 8
- Session 2: 9, 8, 8
- Session 3: 9, 9, 9
- Session 4: 10, 10, 10
You’ve progressed without changing the weight.
Once you can perform the top of your target range with appropriate effort and consistent technique, you can consider increasing the load.
Your reps may then drop towards the bottom of the range and you build them up again.
That’s much more useful than believing you failed because you got nine reps when your programme said ten.
Not every set should be taken to failure
The number of reps you perform doesn’t tell you how difficult the set was.
Consider:
10 reps with a weight you could lift 20 times
versus:
10 reps with a weight you could lift 11 times
Both say:
10 reps
in your training log.
They’re very different sets.
That’s why effort matters.
You don’t necessarily need to take every working set to the point where another repetition is impossible.
Leaving some reps in reserve can let you train hard while managing fatigue.
The appropriate effort depends on the exercise, your programme, your experience and your goals. We cover the trade-offs in should you train to failure?
More sets aren’t automatically better
If three sets work, six must work twice as well.
Unfortunately, training doesn’t work like that.
More sets create more training volume.
They also create more fatigue.
At some point, adding more work can provide diminishing returns while making recovery harder.
Imagine your first three sets are controlled and productive.
Then you add another four simply because you want “more volume”.
By the final sets:
- Your reps have fallen dramatically
- Your technique is changing
- Your performance has collapsed
- You’re creating fatigue that affects your next workout
Those extra sets aren’t automatically useful because you completed them.
Training volume needs to be something you can recover from.
Count your training across the week
Don’t look at one exercise in isolation.
Suppose Monday includes:
- Bench press: 3 sets
- Incline dumbbell press: 3 sets
- Chest fly: 3 sets
That’s already nine direct sets involving your chest.
Then Thursday you train chest again.
Your weekly training volume is the combination of those sessions.
This is why asking:
“How many sets should I do for chest?”
doesn’t have one answer without knowing what else you’re doing.
Look at your programme as a whole.
Different exercises suit different rep ranges
You don’t have to use the same reps for everything.
A heavy compound movement and a small isolation exercise create very different experiences.
For example, you might programme:
Squat — 3 × 5–8
and:
Lateral raise — 3 × 12–15
Trying to perform every exercise for exactly ten reps because “10 reps builds muscle” misses the point.
Choose a range that lets you train the movement effectively and progress it sensibly.
Warm-up sets aren’t the same as working sets
If you’re squatting 100 kg for your working sets, you probably won’t walk into the gym, load 100 kg immediately and start.
You might gradually build towards it:
- Empty bar × 10
- 40 kg × 8
- 60 kg × 5
- 80 kg × 3
then:
- 100 kg × 6
- 100 kg × 6
- 100 kg × 6
Those earlier sets prepared you for the working weight.
They’re not equivalent to your three challenging working sets.
So when a programme says 3 × 6, it usually means three working sets. Your warm-up comes before that and doesn’t count towards the total.
Warm-up sets should prepare you, not tire you out. Keep the reps low as the weight gets closer to your working load, so you arrive at your first working set ready to perform.
Lighter exercises later in a session, such as curls or lateral raises, often need little or no separate warm-up, because the muscles are already working.
We cover how to warm up before lifting in more detail separately.
How hard should your working sets be?
This is where the earlier point about effort becomes practical.
Your sets need to be challenging enough to give your muscles a reason to adapt.
A useful way to judge that is reps in reserve: how many more good reps you could have performed when you stopped.
For example, if your target is 3 × 8–10 and you finish each set feeling you had another one or two reps left, that’s a hard set without going to your absolute limit.
If you finish feeling you could have done another eight, the set probably wasn’t challenging enough to count as a working set in the way you intended.
If every set is a grinding, all-out effort, you may find your later sets and your next session suffer.
Different programmes ask for different levels of effort. The point is to know roughly where you are, rather than counting reps without considering how hard they were.
Why the rep ranges overlap
You may have noticed that the ranges earlier in this article overlap.
That’s deliberate.
A 2017 meta-analysis by Schoenfeld and colleagues found that heavier loads produced greater gains in maximal strength, while muscle growth was similar across a wide spectrum of loads.
In practical terms:
- If you want to lift the heaviest weight you can for a few reps, you need to practise lifting heavy weights.
- If you mainly want to build muscle, you have more freedom to choose a rep range that suits the exercise, your equipment and your preferences.
That’s why someone training for muscle can squat for sets of six and do lateral raises for sets of fifteen, and both can be useful.
How to know if your sets and reps are working
Your programme doesn’t need to feel perfect. It needs to produce progress you can see over time.
Look at your training log across several weeks rather than one session.
Signs it’s working:
- Your reps are increasing at the same weight
- Your loads are going up gradually
- Your technique is staying consistent as things get heavier
- You’re recovering between sessions well enough to perform again
Signs something may need adjusting:
- Your numbers haven’t moved for several weeks
- Your reps are falling from session to session
- You’re arriving at most workouts still tired from the last one
- Your technique is changing to reach the target number
If you’re progressing, there’s no need to change your sets and reps just because a different programme looks interesting.
If you’re stuck, look at effort, recovery and total weekly volume before deciding the rep range itself is the problem.
How to choose your sets and reps
If you want a simple way to choose your sets and reps:
- Start with your goal. Lower reps for heavy strength work, moderate reps for most muscle-building work, higher reps where endurance matters.
- Match the range to the exercise. Heavier compound lifts often suit lower or moderate reps. Smaller isolation exercises often suit moderate or higher reps.
- Start with 2–3 working sets per exercise. You can add more later if you’re recovering well and progress slows.
- Use a rep range, not one fixed number. It gives you room to progress before you change the weight.
- Train with real effort. Stop most working sets with a rep or two left, unless your programme says otherwise.
- Look at your week as a whole. Count the total sets for each muscle across all your sessions.
- Progress gradually. Build reps across the range, then increase the load and build them up again.
None of this needs to be perfect on day one.
A reasonable starting point that you follow consistently and adjust from evidence is worth more than a perfect plan you keep replacing.
Let your last session set the next one
The useful number isn’t 3 × 10. It’s what you managed last time, and what that means for today.
In Trayner, new workouts start from your last session. When you hit every rep, it tells you so: “You hit every rep last time. Add 2.5 kg.”